SuVolta positions DDC as node life extender

SuVolta positions DDC as node life extender

LONDON – Nick Kepler, vice president of products at startup company SuVolta Inc. (Los Gatos, Calif.), has authored an article that expounds the virtues of his company's deeply depleted channel (DDC) technology as a life extender for established bulk CMOS manufacturing nodes such as 90- and 65-nm (see Rethinking the pursuit of Moore's Law).

Kepler argues that the application of DDC and voltage reduction to 65-nm CMOS can produce a lower power consumption device on a lower cost die than the same design implemented in 28-nm bulk CMOS. This conclusion is reached even though the 28-nm die would be roughly half the size of the same IC design in 65-nm CMOS.

DDC uses tight control of graded dopant concentrations below the transistor channel to produce similar results to FinFET physical geometry and FDSOI wafers. The two primary benefits claimed for DDC are a tighter control of the variation in threshold voltage and lower voltage operation. SuVolta's DDC CMOS transistor technology takes both of these approaches to reduce the power consumption of CMOS ICs by 50 percent or more while maintaining performance at a given manufacturing node, the company has claimed.

The early disclosure of the technology at IEDM in 2011 pitched the technology as an easier to implement, lower cost alternative to both FinFETs and FDSOI, generally considered the two major strands of process technology at 22-nm and beyond. This was even though much of the DDC R&D was done in collaboration with Fujitsu Ltd using a 65-nm bulk CMOS baseline process.

Kepler's article argues that the non-recurring engineering costs, including design IP and masks costs, are five times more expensive at 28-nm as they are at 65-nm. However, the article does not factor in additional wafer engineering costs for the DDC process, nor explain a predicted escalation in per-die cost despite die size reduction.

The given conclusion is that the majority of ICs would benefit from remaining on mature process technologies because of the high costs associated with migrating to leading-edge manufacturing processes. DDC brings the option of reducing the power consumption of designs while delaying migration to finer geometries until the steep portion of the cost-learning curve is past. Kepler also makes the point that migration to the 28-nm and 20-nm nodes migration will be particularly expensive because of the need for double patterning of structures, doubling mask cost and increasing dwell time on machines in the wafer fab.

"This technology extension benefit will remain true as the specific process technologies that are classified as “mature” (90nm and 65nm today) and “leading-edge” (28nm today) change over time," Kepler concluded. No disclosure is made as to whether Fujitsu or any other chip manufacturer or foundry has plans to introduce low power consumption DDC versions of established bulk CMOS processes.

SuVolta entered the Silicon 60, EE Times' list of emerging startup companies at version 11.0 in October 2010. The latest edition of the Silicon 60 is version 13.0 which can be found at http://confidential.eetimes.com/analysis-reports/4371437/EE-Times-60-Emerging-Startups


Related links and articles:

www.suvolta.com

News articles:

Rethinking the pursuit of Moore’s law

ST, ST-Ericsson commit to FDSOI, says Soitec

ST opens up 28-nm, 20-nm FDSOI with GlobalFoundries

Slideshow: EE Times, EDN honor 2012 ACE Award winners

TAG:SuVolta DDC semiconductor process power CMOS bulk SOI FinFET FDSOI